The Telewave ANT-150Y-10H is a very rugged, high performance directional antenna for use with the SM1680 Octal AIS Receiver Array and other Shine Micro high-sensitivity AIS receiver installations, such as the SM1610-4.

Six elements provide a minimum of 10 dBd gain, high front-to-back ratio, and wide band capability. The elements are constructed from solid aluminum to prevent intermodulation and provide exceptional strength.

Each antenna is completely protected with Telewave‘s high-tech Txylan™ coating, which provides icing resistance and protection from corrosive gases, UV radiation, salt spray, acid rain and wind-blown sand. In addition, the feed line is protected within the boom, and the radiating element is completely sealed against ice and other hazards, and all antenna components are at DC ground for lightning protection.

The ANT-150Y-10H includes a heavy duty clamp set, secures the antenna to a vertical or horizontal mast or tower support from 1.5”-3.5” O.D. The antenna is shipped unassembled to reduce cost, and is easily assembled in the field with color coded marks.

This Yagi antenna has been tested by Shine Micro, Inc. and is recommended for use with the SM1680 Octal AIS Receiver Array.

Frequency (continuous)	144-174 MHz	Elements	6
Gain (typ)	10 dBd	Dimensions (L x H)	96 x 40 in.
Power rating (typ)	500 watts	Antenna weight	33 lbs
Impedance / VSWR	50 ohms / 1.5:1 (max)	Shipping weight	37 lbs
Front to back ratio (min)	17 dB	Wind rating / with 0.5″ ice	150 / 100 MPH
Beamwidth V/H	44° / 47°	Exposed area (flat plate equiv.)	1.7 ft2
Pattern / Polarization/ Directional	Vertical	Lateral thrust at 100 MPH (40 psf – flat plate equiv.)	67 lbs.
Termination	N-male	Bending moment at mast clamp	222 ft. lb.

Order Online